Access Control and Intrusion _ Innovative. Reliable. Dynamic.

ACTIVOR Wiegand Remote Control

Reduce costs, decrease lead times and improve your competitive edge. We’re offering you the reliable and cost-effective Activor® Wiegand remote control with related programmers. These Wiegand remote/prox tag programmers are specially designed to enable fast and efficient programming.

Our patented remote design allows a prox tag to be easily inserted into the remote without opening the case.

 

Wiegand Receivers RRW01&RRW02

RRW0102 5
  • Wiegand 26bit, 4 channels
  • 433Mhz; other frequencies available on request
  • Option of site-code-verification or non-code-verification (all pass through)
  • Outdoor version RRW01: IP 65
  • Indoor version RRW02: compact design; can be easily fitted into a third party cabinet
  • Each channel has an on-board LED to indicate data passage
  • 4-channel standard 26bit Wiegand output
  • Frequency: 433MHz
  • Voltage: 9-15VDC
  • Current: 15mA
  • Option of pass-through or site-code verification
  • IP65 rating for RRW01
  • Dimensions:

                        RRW01: 113mm (H) x 100mm (W) x 38mm (D)

                        RRW02: 63mm(H) x 87mm (W) x 27mm (D)

Wiegand Remote RTW19

RTW19
  • Patented design allows the prox tag to be easily inserted into the remote without opening the case
  • Attractive metallic frame and stainless steel plate
  • Long battery life: 3 years in normal operating conditions
  • Long RF range: 100m (open air)
  • Tag: EM, HID or Mifare (tag programmers also available)
  • 433 MHz, other frequencies are available on request
  • Keeloq rolling code: 4.3 billion combination
  • SAW resonator (filter) locked (+/- 75KHz); Superhet technology
  • Operating Range: 100m (open air)
  • Transmitting power: <10mW
  • Operating Voltage: 6 V powered by 2 x lithium batteries CR2032
  • Battery Life: 3 years under normal operating conditions
  • Current: <1uA standby; 12mA max.
  • Low battery indication
  • Auto shutoff: the remote stops transmitting if a button gets pressed for 25s

Wiegand Remote RTW01

RTW01
  • Sliding cover to prevent accidental activation of button
  • Sturdy design with stainless steel plate and attractive metallic frame
  • Long battery life: 3 years in normal operating conditions
  • Long RF range: 100m (open air)
  • Can be fitted with prox tag: EM, HID or Mifare (tag programmers also available)
  • Operating Range: 100m (open air)
  • Keeloq rolling code: 4.3 billion combination
  • 433 MHz other frequencies are available on request
  • SAW resonator (filter) locked (+/- 75KHz); Superhet technology
  • Transmitting power: <10mW
  • Operating Voltage: 6V powered by 2 lithium battery CR2032
  • Battery Life: A minimum of 3 years under normal operating conditions
  • Current: <1uA standby; 12mA max.
  • Low battery indication
  • Auto shutoff: the remote stops transmitting if a button gets pressed for 25s

Prox Tag

DISC tag w
  • All Activor® remotes can be fitted with any coin tags
  • DEM26            EM 26bit   coin tag
  • DHI26              HID 26bit  coin tag
  • DMI20             Mifare 1K   coin tag
  • Rewritable 
  • Diameter 20mm
  • Self adhesive
  • 125KHz or 13.56MHz
  • Size: 20mm x 1mm
  • Self adhesive

Wiegand Display RTW-D

RTW R
  • Display standard Wiegand 26bit code in decimal and hexadecimal
  • This standalone display can be used to easily test any devices with Wiegand 26bit output, such as prox card reader,and Wiegand receiver
  • Portable or wall mount
  • Easy to wire – flying leads provided
  • Power source: 12VDC
  • Current: 50mA
  • Two-line LCD display – decimal and hexadecimal
  • Dimensions: 140mm(L) x 100mm(W) x 28mm(H)