Access Control and Intrusion _ Innovative. Reliable. Dynamic.

GUARDOFF Shock Detectors

The Guardoff® shock detector WSD series offers the choice of piezoelectric or mass inertial transducer. It also features a wide range of sensitivity settings, making it suitable for all applications.

The wireless shock detector provides full supervision including tamper, low battery and RF interruption.

Hardwired Shock Sensors WSD02 & 01

WSD01WSD02A

WSD02:

  • Mass inertial vibration sensor
  • Gold plated, self cleaning contacts – highly corrosion resistant
  • Suitable for horizontal or vertical mounting
  • Wide range of sensitivity settings
  • Option of non-latching or latching settings
  • Dual LED indicators for power and alarm
  • The relay is protected by metal casing to minimise magnetic interference
  • Built-in reed switch

WSD01:

  • Piezoelectric transducer
  • Wide range of sensitivity settings
  • Pulse counting selection
  • Dual LED indicators for power and alarm
  • Built-in tamper protection
  • Option of non-latching or latching settings

WSD02:

  • Power                        9-16VDC
  • Current                      15 - 18mA
  • Reed gap                   28mm
  • Operating temp          -10 to +55℃
  • Relay rating               500mA 100V; 10 Ohm in series
  • LED indication           Red=Alarm; Green=Power
  • Pulse counting           One or two
  • Dimension                 100 × 29 × 24mm

WSD01:

  • Power                        9-16VDC
  • Current                      15 - 18mA
  • Operating temp         -10 to +55℃
  • Relay rating              150mA 24V; 10 Ohm in series
  • LED indication          Red=Alarm; Green=Power
  • Pulse counting          One or two
  • Dimension                 87 × 26 × 21mm

Wireless Shock Sensor WSD10

WSD02ARRR1000
  • Complete transmitter monitoring and status display: tamper, low battery and RF interruption together with transmitter ID
  • Large capacity: up to 1000 transmitters
  • Audio alert
  • Events retrievable
  • Built-in tamper protection
  • Mass inertial vibration sensor
  • Gold plated and self cleaning contacts
  • Built in reed switch
  • Long battery life: up to 6 years with typical use

Transmitter:

  • RF range: 100m (open air)
  • Transmitting power: <10mW
  • Current: 5uA – 15mA
  • Battery: 3.6V; Lithium; 1/2AA (ER14250)
  • Battery life: up to 6 years with typical use
  • Reed gap: 28mm
  • Operating temp: -10 to 55℃
  • Dimensions: 100 x 29 x 24mm

Receiver:

  • Power: 9-16VDC
  • Current: 8-120mA
  • Frequency: 433.92MHz
  • 4-digit display
  • Capacity: 1000 transmitters
  • Dimensions: 89 x 65 x 29mm